SAK Automatic Sampler
Part #: TBD
Designed for sampling powders, flakes, and granules, the ISOLOK SAK sampler ensures that your samples are representative of your entire process.
The ISOLOK sampler's design uses compressed air to grab a fixed amount of product at set intervals. The product is then discharged by gravity to a sample container. This ensures that your sample is representative of the entire batch.
- The SAK powder sampler is designed to capture a 16 or 18cc sample each cycle, making it adaptable to sampling requirements.
- The sampler's tri-clamp mounting design allows for easy installation, maintenance, and versatility within process lines- verticle drop chutes, slide cutes, or bins/hoppers.
- Handles powder, flakes or pellets up to 11/32 inch (9mm) without shearing or degrading sample material.
|Sample volume per cycle||16 or 18 cc|
|Maximum particle size||0.34 in (9 mm)|
|Maximum cycle frequency||15 strokes per minute, depending on application|
|Materials||316 stainless steel; other materials available|
|Actuator seals||filled Teflon®; other materials available|
|Static seals||fluoroelastomer; other materials available|
|Plunger seals||filled Teflon, polyurethane, EPDM rubber; other materials available|
|Sample temperature range||-40°F to 575°F (-40°C to 302°C), depending on seal material and duty cycle|
|Ambient operating temperature range||-5° to 131°F (-20° to 55°C) depending on seal material|
|Line mount adapter type||2 in (50 mm) clamp ferrule|
|Compressed air requirement||2 SCFM at 30 to 80 psig (2.1 to 5.5 barg)|
|Dimensions||10.44 in x 3 in (26.5 cm x 7.6 cm)|
|Shipping weight||10 lb (4.5 kg)|
Learn more about how the SAK Automatic Sampler can benefit your application with the following resources.
Need Something Else?
Review some other related products that could help your current application.