Model SA Sampler
Model SA Sampler

Model SA Sampler

Part #: TBD

Get Started

Request A Quote

Still Have Questions?

Contact Us
Obtain representation of your entire vertical product stream with the Sentry Model SA Sampler.
By taking a cross section of grain, granules, or flakes as it travels down a chute, the air actuated or electric sampler can get a representative sample of your process without affecting the characteristics. 

  • The SA Sampler Sampler is dust and vapor resistant to eliminate potential degradation of sample.
  • This bulk solids sampler is flexible with a variety of options available – wear liners, QPQ hardening, pre-plumbed filter-regulator, explosion proof motors and more.
  • Available in square or round gravity chutes and two- or three-inch (51 or 76 mm) discharge tubes to accommodate different particle sizes.

Materials Particle Size Temp Rating Air Requirements
300 series stainless steel, white nitrile,
Kevlar®, aluminum cylinder
10 μm to 1/4 in (6 mm) -20 to 180°F (-29 to 82°C) 60 to 80 psi (4.1 to 5.5 bar)

 

Related Resources

Learn more about how the Model SA Sampler can benefit your application with the following resources. 

Need Something Else?

Review some other related products that could help your current application. 

Model G Cross-cut Sampler

Obtain representation of your entire vertical or inclined product stream with the Sentry Model G Cross-Cut Sampler.

SBC Controller

Automate your bulk solid sampling with Sentry's SBC Controller. Utilizing a few simple connections, the controller ensures operators can automate a single or continuous sample with any Sentry ISOLOK or bulk solid sampler.

Contact our Professionals

Not What You're Looking for? Contact Our Professionals

Contact Us