SAE Automatic Sampler
Get Started
Request A QuoteNot What You're Looking For?
Contact UsDesigned for particles up to 3/4 inch (19mm), the ISOLOK SAE particle sampler ensures that your samples are representative of your entire process without degrading or shearing the sample.
This automatic sampler uses a four-inch stroke cylinder to obtain samples from heavy-walled vessels.
The ISOLOK sampler's design uses compressed air to grab a fixed amount of product at set intervals. The product is then discharged by gravity to a sample container.
- The SAE powder sampler is designed to capture a 90 or 100cc sample.
- The sampler is available in versatile seal options to meet your process needs.
- Installation and maintenance is a breeze with the sampler's heavy duty 3-inch tri-clamp ferrule.
Temperature
- ISOLOK SAE ambient operating temperature -5˚ to 131˚F (-20˚ to 55˚C), depending on the seal material.
- The sample material temperature can be -40˚ to 575˚F (-40˚ to 302˚C), depending on seal material and duty cycle.
Pressure
- The SAE sampler can handle up to 200 PSI (13.37 bar) process pressure, depending on the application.
- Contact our team if higher pressures are needed.
Particle Size
- The maximum particle size for this ISOLOK is .75 in (19 mm).
18.2 in x 6.5 in (462 mm x 165 mm)
Related Resources
Learn more about how the SAE Automatic Sampler can benefit your application with the following resources.
Spec Sheets
ISOLOK SAE Sampler Spec Sheet
Instruction Manuals
ISOLOK SAE Sampler IOM
Marketing Materials
Automatic Sampler Brochure
Application Guides
Liquid and Slurry Application GuideNeed Something Else?
Review some other related products that could help your current application.
Model RPG Bulk Solids Sampler
SAH Automatic Sampler
Model PR Bulk Solids Sampler
Model RX Bulk Solids Sampler
