Guide to Representative Sampling
Learn the many benefits of representative sampling and get answers to your representative sampling questions
The Sentry MBP manual low emission sampler is ideal for sampling liquid and slurry material in tanks, pipes and vessels using a closed-loop system for applications where there is no separate return or drain line connection. With the sample source and the sampler purged as part of every sampling cycle, a new representative sample is obtained during each and every sampling event.
The Sentry MBP sampler provides representative samples while protecting the safety of operators and the environment. Two types of samplers are available based on the sample volume required. The standard model is designed for sample volumes above 1 oz (30 ml) and is available in various sample flow path and connection sizes. The low-volume model is designed specifically for minimal flow path size so representative sample volumes as low as 0.033 oz (1 ml) can be obtained.
The sampler requires only the connection of a compressed gas source for purging, the sample source, and a vent line. All operations are controlled with a simple fourposition sample selection valve.
Takes contemporary liquid samples from tanks, vessels or pipes without recirculation.
|Maximum Process Pressure||250 psig at 150°F (17.3 barg at 65°C)|
|Process Temperature||150°F at 250 psig (65°C at 17.3 barg)|
|Wetted Materials||316 SS, PTFE, (Viton or Kalrez)|